Royalty/Frozen Rotors Install
Tools Needed:
Jack
Jack Stands
14MM & 12MM Sockets
Ratchet
14MM & 12MM Wrenches
Brake Fluid (not required)
Replacing rotors is quite simple so we will do a quick run down.
Step 1: Loosen the wheel lug nuts, raise the car and support securely on jackstands.Remove the wheel. Remove the two disc retaining screws.
Step 2: Remove the 14MM and 12MM bolts that hold the caliper and bracket in place. Its not necessary to remove the brake line. After removing the caliper bolts, suspend the caliper out of the way with a piece of wire.
Step 3: Remove the rotor and replace with new. Spray disc surface with brake cleaner to remove any dust,dirt or grease.
Step 4: reinstall caliper, you may have to compress the piston.
Step 5: installation is reverse of dis assembly.
Royalty Rotors is a leading manufacturer and supplier of performance slotted cross drilled rotors.
The cryo treated rotors have alot of great benefits including:
Provide excellent braking power
Cross drilled holes degas brake pads and reduce fade and minimizes brake dust.
Silver zinc platting prevents rust and corrosion
Cryo treated to extend rotor life.
Visitwww.royaltyrotors.com For more information and pricing
Leave a Reply
Tuner Maneuver Magazine - Muskegon,MI
