http://www.hidxenonheadlights.com/ sent us a set of 6000K HID lights to install on our project “Remember The Fallen” 1992 Acura Integra and we wanted to show everyone how we went about installing.

We followed the following diagrams for the install and recommend everyone else should also:

First things first we are no professionals when it came to this install, this was our first time with this style kit so we made do with it and made our adjustments as you will see in the photos. All install processes will differ depending on vehicle. We had to remove our intake in order to mount one of our ballasts first off. Our job was quite easy since we had a wire tuck completed and we plan to hide everything once our new motor installed.

As you can see from the next photo we installed our ballast under where our intake filter would sit, we were sure to take a piece of sandpaper to bare the metal underneath for an optimal ground.

http://www.hidxenonheadlights.com/ packages the bulbs very securely to prevent any damage during shipping as you can see:

They make the kit quite the plug-n-play unit; the bulbs simply replace your OEM bulbs with a twist of the locking ring and a turn of the bulb. As you can see below:

On the passenger side we also had to mount the relay box which is suppose to use a double sided 3M tape which wouldn’t stick for us , the box needs to have a mounting tape with a self taping screw or a mounting bracket. Since it didn’t we make our own as you see?

As you can see once the intake was re-installed (please don’t mind the wiring mess) everything seemed to work great other than the bracket problem and was straight forward.